How NOT!  To be safe while flying a home made plane

L.G use precise verbs 
S.O.S Havent used get,grab,put.
          -Inclued humour

If you're a Daredevil and want to get really  badly hurt in a plane machine thing then read on.

1:Do NOT!  Add seat belts,air bags and pillows or any safety stuff to your machine.

2:Do NOT!  Check your runway for rocks,hills and while you're at it make sure it goes off a nice short cliff with either a pond with crocodiles or a BIG pit of fire.

3:Make sure  to  NOT!    Fully screw the screws in and don’t use super glue just use normal glue.

4:place a cardboard box on your head and cut some holes to see.And wrap bubble wrap around your body and now you have your extreme daredevil suit.

5:For motivation look at a cute cat on the internet or get a friend to motivate you “DO IT ...COME ON!!’’.

6:Hop in 321 and blast off go as fast as you can and as you go off the cliff light the wings on fire and if you crash YAY! But if you don't then you failed.

Now hopefully you are in hospital i hope these steps helped.

HOW TO MAKE A BOTTLE CAP FIDGET SPINNER

Have you ever been bored? Do you really want a fidget spinner but your parents say no? Do not have any money? Well here's a simple way to make a fidget spinner.

                                       

You will need

                                                                                                                  

                                                                

 6 bottle caps at least 2 have to be the same size

A hot glue gun make sure have the glue stick to put init

Scissors

Skure

Marker

Screwdriver or nail

Step 1: Poke a hole in the middle of 2 caps make sure they're the same size.Then get the skure cut it so it pokes out a bit then see if it spins good take it out and if it didn`t  you need to make the hole bigger.Then glue the 2 caps with the holes together make sure the skure can still go through the hole

Step 3: Now get the other 3 caps and place them evenly in a triangle shape around the center and do a mark then glue where the mark is and stick the caps on.

Step 4: Now stick the skure in and glue the ends and WHA LAA!!! You just made a bottle cap fidget spinner.